AC brushless variable-speed angle grinder
Hitachi Power Tools' G12VE 4 1/2-inch angle grinder can be used with extra-long extension cords, eliminates motor maintenance and delivers superior performance when powered by a generator.
The AC Brushless motor results in the ultra-slim grip circumference of this grinder that reduces fatigue and improves control during continuous-use applications.
Hitachi’s AC brushless motor is more efficient, leading to longer run time, increased power and extended durability with essentially no maintenance. Eliminating the need for carbon brushes means freedom from issues with the motor armature burning out, and experiencing layer shorts or commutator wear in severe environments. Also, brush wear and resulting armature damage from lack of maintenance is the most common service issue. This is completely eliminated by the brushless motor resulting in more uninterrupted run times.
Additionally, Hitachi AC brushless tools integrate electronic controllers that compensate for reduced power loss due to voltage drop. The G12VE AC brushless grinder is also designed for compatibility with a generator, thanks to Hitachi’s compact and highly efficient inverter circuit. This circuit cleans up and modulates the electricity before it is used in the motor providing steady, stable operation and greatly reducing the risk of damage to the internal circuits. This is ideal for mobile contractors without a permanent power source on the job site.
The G12VE has a 12-amp motor with 1,300 watts of input power. The variable-speed
dial is adjustable between 2,800-10,000 rpm (no-load speed) allowing the user to
determine the best speed for the application. A soft-start function reduces the load felt by the user at start-up. Trigger lock-on is available for convenience and comfort during continuous use applications. It accepts 4-1/2-inch wheel accessories to tackle a multitude of applications, and an easy-to-manipulate spindle lock located at the front of the grinder makes it simple to change out the accessories as needed. The included side handle can be moved to either side of the grinder for added control and maneuverability. Weighing just 4.2 pounds, the G12VE is lightweight for easy operation.
This grinder comes with electric overload protection, kick-back reduction and zero voltage restart protection. Electronic overload is a feature that stops the motor when too much pressure is applied. The grinder automatically shuts off to protect the motor from overload, and the gearbox from damage. The tool must be switched to the off position, and then turned back on to resume work. Kick-back reduction quickly shuts off the power in the event of a bound wheel to extend the life of the gears and protect the user from potential harm. Lastly, zero voltage restart protection prevents the grinder from restarting if power is
temporarily cut during operation.
Covered by Hitachi’s one-year warranty, the G12VE 4-1/2-inchAC brushlessvariable-speed angle grinder from Hitachi is unique in the marketplace, and is designed to last while stone polishing, surface finishing, removing rust and paint, light grinding, finishing concrete and performing applications using wire cup or wire wheel attachments.
Expect to see more AC brushless motor tools from Hitachi.
PRO CONTRACTOR RENTALS MAGAZINE
Pro Contractor Rentals provides information of value to rental centers who focus time, resources and attention on meeting the demands of construction contractors and other equipment rental customers.
