Product Focus: Concrete finish and placement tools
 |
Lithium-ion-powered saw
The Stihl TSA 230 Cutquik cut-off machine starts with ease and offers zero exhaust emissions for cutting in enclosed spaces and on job sites where gasoline-powered equipment is not permitted. It features an onboard water connection and control to suppress dust. The unit is driven by a low-maintenance, brushless, commercial-grade high-torque electric motor powered by a 36-volt Lithium-ion battery pack. It creates little noise and the unit has low vibration. Its lightweight design reduces operator fatigue and increases maneuverability. It can provide up to 15 minutes of high performance with no power fade. It recharges quickly, especially with the optional Rapid Charger.
www.stihlusa.com
 |
Propane-powered ride-on polisher
Wagman Metal Products Inc. introduces the GHP LP230, a highly maneuverable, versatile, compact ride-on polishing machine. It has a work path of 30 by 63 inches, yet fits through a 32-inch doorway and also fits into a pick-up truck bed. With its low center of gravity and patented attachments, its twin planetary processing action makes it ideal for grinding, honing and polishing. The machine uses Wagman’s patent-pending Prodiacc pads that feature a long-lasting, high-performance and quick-change diamond system. The propane system is CARB- and EPA-certified and complies with OSHA indoor air emissions requirements to limit carbon monoxide levels to less than 1 percent.
www.wagmanmetal.com
 |
Concrete dumper
Wacker Neuson adds the 3-ton 3001 Concrete Edition dumper that is outfitted with a specially designed concrete chute that allows fast and efficient delivery and placement of concrete. The special bucket shape reduces spills and splatters. The metal chute has high side walls to avoid spilling and the narrow front enables precise pouring. The 3001 bucket also has higher walls and are tapered inward to avoid spilling while transporting concrete. The larger capacity allows contractors to transport 40 cubic feet of concrete per load. The unit travels up to 14 mph and has a small footprint that reduces the risk of rutting. Outfitted with optional turf tires, the dumper will not disturb finished surfaces. All-wheel hydrostatic drive can make rough terrain and remote areas accessible. Articulated steering makes tight turns possible and the swiveling bucket allows material to be unloaded from the front or sides of the unit.
www.wackerneuson.com
 |
Combo screed with built-in level vial
Bon Tool Co. improves on its Kangaroo combo screed by adding a bubble level in the handle to provide time-saving, precise preparation and finish work. The lightweight aluminum design and built-in handle make it easy to move heavy loads. The combo tool features a sharp edge that provides a clean screed; its rounded edge provides a good start to floating off or closing out concrete. The built-in ribbed handle provides excellent grip and better leverage to pull large amounts of material. The bottom edge of the screed provides an asphalt checker system, while the level bubble makes an even more precise measure with which to set base or check your work. Made of a lightweight, yet high-tensile aluminum, it resists bending and is durable for years of service. It is fully reversible, making it even longer lasting. It is available in five lengths from 4 to 12 feet.
www.bontool.com
 |
Upgraded walk-behind power trowels
Atlas Copco’s new walk-behind power trowels — the BG 245, BG 375 and BG 475 — include upgraded features that enhance versatility and safety on a variety of applications, from fine edge to rough surface concrete finishing. The units can be equipped with a twist pitch or quick pitch for optimal performance on a wide range of jobs. The units have Atlas Copco’s QuickStop feature that stops the blade rotation immediately if the operator releases the handles. This results in zero-
degree spin that minimizes the risk of injury.
www.atlascopco.us
 |
Tracked mud buggy
Toro introduces its new, patent-pending MB TX 2500 tracked mud buggy. It has intuitive controls for excellent maneuverability in confined areas, regardless of the operator’s skill level. The unit can carry up to 2,500 pounds of material and the 25 horsepower Kohler Confidant engine delivers the power to tackle the toughest hauling job. It can travel up to 6 mph in forward and 3 mph in reverse. Outfitted with Endless Kevlar-reinforced tracks, the unit has outstanding traction on a wide range of terrains and also performs well in mud, gravel or snow. The unit has a unique dump switch design that travels with the controls so the dump switch is always at the operator’s fingertips. The unit also features an auto-return dump feature that eliminates the need for the operator to wait for the tub to return to traveling position, increasing overall productivity. The model weighs approximately 1,575 pounds; the tub holds 16 cubic feet of material. Belts, hydraulics, battery and engine compartment are easily accessible and simple to maintain. It is designed with fewer hoses and fittings when compared with other material handlers in its class.
www.toro.com
 |
Tier 4 Final concrete pump line
Putzmeister’s new line of Tier 4 Final Thom-Katt trailer pumps include the TK 50, TK 60HP and TK 70 models that have a redesigned body, new hood, tanks and cooler location. They have an active information display, angled hopper for ease of use and cleaning, and a wide, high-strength trailer for maximum stability.
www.PutzmeisterAmerica.com
PRO CONTRACTOR RENTALS MAGAZINE
Pro Contractor Rentals provides information of value to rental centers who focus time, resources and attention on meeting the demands of construction contractors and other equipment rental customers.
